QY25K Hydraulic mobile crane



QY25K belongs to one of "K" series products. With a max.lifting load of 25t at 3.5 working radius, the crane has a boom of 4 sections which are of large arc hexagon profile and one section of jib.Derikking with a single front cylinder,double indepandant winchs,pilot hydraulic proportion control system,full and spacious cabin with good eyeview,environment friendly engine,complete security fittings.The density of the crane is low ,ensuring high stability and fast travelling speed.It is of high manuvorbility and can be used in various working occsions
Technical data in travel state
Dimensions , , ,
Overall length mm , 12210
Overall width mm , 2500
Overall hight mm , 3260
Wheel base , , ,
1st axle mm , 4025
2nd axle mm , 1350
Track , , ,
1st track mm , 2079
2nd track
mm
, 1834
weight , D6114 M11-C250
Dead weight in travel stae
kg
25700 25970
Axle load
,
, ,
1st axle
kN
64.19 66.74
2nd axle
kN
187.67 187.77
powe
,
, ,
Engine rated output
kN/(r/min)
152/2200 182/2100
Rated torque
N.m/(r/min)
790/1400 1035/1300
Rated turning speed
r/min
2200 2100
travel
,
, ,
Travel speed
,
, ,
Max.travel speed
km/h
72 69
Min. travel speed
km/h
2.9 3.75
Turning diameter
,
, ,
Min.turning diameter
m
21.5 21.5
Min. turning diameter at boom tip
m
24.43 24.43
Min. ground clerance
mm
260 260
Approch angle
°
16 16
Depature angle
°
13 13
30km/h)Braking distance(at 30km/h)
m
≤10 ≤10
Max.gradeability
%
26 29
Fuel consumption of 100 km
L
35 35
Technical data for lifting operation
Lifting performance , ,
Max.total rated lifting load
t
25
Min. rated working radius
m
3
Turning radius at swing table tail
mm
3065
Max.load moment
,
,
Base boom
kN.m
941
Full-extent boom
kN.m
439
Full-extent boom+jib
kN.m
331
Outrigger extension distance
,
,
Logitudinal
m
4.8
Lateral
m
6.0
Lifting hight
,
,
Base boom
m
10.5
Full-extent boom
m
32
Full-extent boom+jib
m
40.15
Boom length , ,
Base boom
m
10.4
Full-extent boom
m
32
Full-extent boom+jib
m
40.15
Attaching angle for jib
°
0?15?30
Working speed degree
,
,
Boom elevating time
,
,
Boom hoisting
S
75
Boom falling
S
45
Boom telescoping time
,
,
Full extending
S
100
Full retracting
S
60
Max.slewing speed
r/min
2.5
Outrigger telescoping tome
,
,
Outrigger beam extending synchronously
S
35
Outrigger beam retracting synchronously
S
30
Outrigger jack extending synchronously
S
40
Outrigger jack retracting synchronously
S
35
Hoisting speed(single rope)
,
,
Main winch with full load
m/min
70
Main winch without load
m/min
100
Auxiliary winch with full load
m/min
60
Auxiliary winch without load
m/min
100
Sound level outside cabin
dB(A)
≤118
Sound level inside cabin
dB(A)
≤90

 

Copyright © 2008 xcmcme . All Rights Reserved.